Starlink Installation Samlesbury

Starlink Installation Samlesbury, £200.00 fixed fee, The Starlink Guys
Here we have a whole house upgrade from a BT 5mbs let down carried out by Andy and Ethan in Samlesbury on the outskirts of Preston.
The client had enough of the poor speeds and lack of internet coverage around the property so contacted us for a bit of advice, they decided to the full house upgrade with Starlink at the centre as the internet provider as no other viable options.
We first installed the Starlink up on a galvanised wall bracket and alloy mast to ensure and long lasting and secure install, the cable was routed into the upstairs office and router configured speeds were 250mbs straight off the bat.
We then ran a Cat 6 external from the office up and over the building into the living room and fitted an RJ45 socket on the wall, we set up a mesh network of Deco x55 mesh nodes one as a master from Starlink, one on the hardwired cable to lounge, and finally a wireless in kitchen. The whole house no saturated with Wi-Fi and everywhere above 200mbs.
The final part was to install an external access point using the dual band TP Link EAP 225 with a cat 6 cable, this was to cover the garage and outdoor office area and some distant stables. We were getting 220mbs at the garage 50 meters from access point.
Customer over the moon

Here at Aerial-Tek we provide a professional installation for your Starlink system whether it be wall mounted, chimney mounted or other type of installation. Starlink needs an open view of the Sky usually orientating in a southerly direction, main issues with the installations are trees or close proximity to other buildings there is always a work around.

Types of Installation


Most Starlink jobs we do are wall mounted for stability and to ensure the installation of your equipment is accessible and to ensure a long lasting install. We only use galvanised wall brackets and alloy mast to ensure no rust or staining on the wall.

starlink wall mountedpng


Sometimes due to various reasons such as line of sight, trees, buildings or planning issues such as Listed buildings we have no option to mount up on the chimney. Our chimney installations comprise of a galvanised chimney cradle and lashing bracket, no drilling is done on the chimney to prevent damage issues.
starlink chimney mountedjpeg
 Sometimes you may require a flat roof installation so the dish is hidden such as a listed building, we can install for you and you don't always require an expensive mount we can install onto a concrete slab which we can carry up onto the roof as a secure mounting point.
starlink roof mountedjpeg

Here at Aerial-Tek we can offer more than just installing your new Starlink equipment we also help you get your WI-FI around your property. We are professional installers of Network cabling such as CAT6 including installation of RJ45 sockets. We can advise you and install mesh networks such as the range of TP Link mesh nodes either over wi-fi or backhauled over cat6.

For all your Starlink enquires feel free to get in touch Andy
Tel 07534524684