Starlink Installation Marston

Starlink Installation Marston, £200.00 fixed fee, The Stalink guys.
Here is an installation of Starlink for a remote property currently undergoing renovation in Marston on the outskirts of Northwich carried out by Andy and Ethan.
The customer had currently had a BT speed of 6mbs over copper which isn’t enough spread over such a vast property that required a lot of cameras and remote access systems which was never going to work with an internet connection like this.
We installed the Starlink dish up on the chimney as the whole property was going through the process of k rendering so we decided to hide the dish out of the way, again using a galvanised bracket and alloy mast, the chimney did have an active log burner but due to the size the dish was quite a way from it, the cable was routed into the office, speeds were coming in at 250mbs so a very happy customer.
We are going back in a few weeks to help with some networking issues as the house had been pre wired with cat6 cabling but never finished off.
For more info or to book an installation in Marston feel free to get in touch.

Here at Aerial-Tek we provide a professional installation for your Starlink system whether it be wall mounted, chimney mounted or other type of installation. Starlink needs an open view of the Sky usually orientating in a southerly direction, main issues with the installations are trees or close proximity to other buildings there is always a work around.

Types of Installation


Most Starlink jobs we do are wall mounted for stability and to ensure the installation of your equipment is accessible and to ensure a long lasting install. We only use galvanised wall brackets and alloy mast to ensure no rust or staining on the wall.

starlink wall mountedpng


Sometimes due to various reasons such as line of sight, trees, buildings or planning issues such as Listed buildings we have no option to mount up on the chimney. Our chimney installations comprise of a galvanised chimney cradle and lashing bracket, no drilling is done on the chimney to prevent damage issues.
starlink chimney mountedjpeg
 Sometimes you may require a flat roof installation so the dish is hidden such as a listed building, we can install for you and you don't always require an expensive mount we can install onto a concrete slab which we can carry up onto the roof as a secure mounting point.
starlink roof mountedjpeg

Here at Aerial-Tek we can offer more than just installing your new Starlink equipment we also help you get your WI-FI around your property. We are professional installers of Network cabling such as CAT6 including installation of RJ45 sockets. We can advise you and install mesh networks such as the range of TP Link mesh nodes either over wi-fi or backhauled over cat6.

For all your Starlink enquires feel free to get in touch Andy
Tel 07534524684