Starlink Installation Chester

Starlink Installation Chester, Hard wired Mesh installation, The Starlink Guys
Here is an installation of Starlink carried out by Andy and Ethan on the outskirts of Chester for a customer suffering from poor speeds from BT.
Current setup was a Copper line from BT with speeds coming in at 5mbs but that was only the start of the problems with the house needing coverage and also annexe building that was used to play Xbox.
We installed the Starlink on the back wall using a galvanised wall bracket and alloy mast with cable routed into the lounge where the router was configured and speeds coming in at 280mbs so happy with results.
We then ran 2 Cat 6 external runs one 2 another lounge quite a distance, we then ran a long external Cat 6 cable approx 80 meters around the large property and down under the gravel into some trunking and up into the annexe building.
We installed the Deco X55 triple pack with master in the lounge, second one into second lounge and third into the annexe all backhauled so no losses and the Xbox now plugged in for a full speed hardwired connection.
Speeds everywhere coming on at close to 200mbs.
For more info or to book an installation feel free to get in touch.

Here at Aerial-Tek we provide a professional installation for your Starlink system whether it be wall mounted, chimney mounted or other type of installation. Starlink needs an open view of the Sky usually orientating in a southerly direction, main issues with the installations are trees or close proximity to other buildings there is always a work around.

Types of Installation


Most Starlink jobs we do are wall mounted for stability and to ensure the installation of your equipment is accessible and to ensure a long lasting install. We only use galvanised wall brackets and alloy mast to ensure no rust or staining on the wall.

starlink wall mountedpng


Sometimes due to various reasons such as line of sight, trees, buildings or planning issues such as Listed buildings we have no option to mount up on the chimney. Our chimney installations comprise of a galvanised chimney cradle and lashing bracket, no drilling is done on the chimney to prevent damage issues.
starlink chimney mountedjpeg
 Sometimes you may require a flat roof installation so the dish is hidden such as a listed building, we can install for you and you don't always require an expensive mount we can install onto a concrete slab which we can carry up onto the roof as a secure mounting point.
starlink roof mountedjpeg

Here at Aerial-Tek we can offer more than just installing your new Starlink equipment we also help you get your WI-FI around your property. We are professional installers of Network cabling such as CAT6 including installation of RJ45 sockets. We can advise you and install mesh networks such as the range of TP Link mesh nodes either over wi-fi or backhauled over cat6.

For all your Starlink enquires feel free to get in touch Andy
Tel 07534524684