Starlink Installation Bolton By Bowland

Starlink Installation Bolton by Bowland
Here is a Starlink Installation carried out by Andy and Ethan for a remote property in Bolton by Bowland.
The customer for this installation was using the old BT copper lines with speeds of 2mbs at best so needed improvements due to working from home, there were no other viable options so starlink was the way forward.
The dish was fitted up on the gable to rear of property using a galvanised wall bracket and alloy mast with the cable routed around the building to the front living room where the router was installed with speeds of 250mbs.
We then set up a set of TP Link Deco X55 mesh nodes around the property with one in the lounge as master from Starlink with one upstairs and another on the window ledge in utility room. Set up like this the speeds were coming in at 180mbs everywhere and even across the yard from utility room into the workshop, so a very happy customer.
For more info or to book an installation in Bolton by Bowland feel free to get in touch.

Here at Aerial-Tek we provide a professional installation for your Starlink system whether it be wall mounted, chimney mounted or other type of installation. Starlink needs an open view of the Sky usually orientating in a southerly direction, main issues with the installations are trees or close proximity to other buildings there is always a work around.

Types of Installation


Most Starlink jobs we do are wall mounted for stability and to ensure the installation of your equipment is accessible and to ensure a long lasting install. We only use galvanised wall brackets and alloy mast to ensure no rust or staining on the wall.

starlink wall mountedpng


Sometimes due to various reasons such as line of sight, trees, buildings or planning issues such as Listed buildings we have no option to mount up on the chimney. Our chimney installations comprise of a galvanised chimney cradle and lashing bracket, no drilling is done on the chimney to prevent damage issues.
starlink chimney mountedjpeg
 Sometimes you may require a flat roof installation so the dish is hidden such as a listed building, we can install for you and you don't always require an expensive mount we can install onto a concrete slab which we can carry up onto the roof as a secure mounting point.
starlink roof mountedjpeg

Here at Aerial-Tek we can offer more than just installing your new Starlink equipment we also help you get your WI-FI around your property. We are professional installers of Network cabling such as CAT6 including installation of RJ45 sockets. We can advise you and install mesh networks such as the range of TP Link mesh nodes either over wi-fi or backhauled over cat6.

For all your Starlink enquires feel free to get in touch Andy
Tel 07534524684