Starlink Installation Blackrod

Starlink Installation Blackrod, Generation 3, Space Internet Solutions.
Here is a Starlink installation carried out by Andy and Ethan in a blackrod on the outskirts of Bolton for a remote property that was suffering with terrible internet issues.
The house was a remote farmhouse with a few outbuildings that also needed some good sort of internet connectivity. There were 3 separate buildings all running with independent BT lines and all with speed of 1mbs and best so they needed an answer.
We had arranged to for the Starlink up on the main farm house which we did using a galvanised wall bracket and alloy mast, using one of our own Generation 3 pole mounts this was securely attached to the Starlink dish, bit of an exposed spot but with peace of mind it will stay secure on our mount.
The cable was routed into the office with speeds of 300mbs coming in so very happy.
The second part of the job was to send the signal over a wireless bridge to the lodge building with a separate mesh system installed to keep it separated.
We also ran another Cat 6 cable across to another building, now all the buildings have good speeds and can get rid of the multiple BT lines and save some money.
To book an installation in Blackrod feel free to get in touch.

Here at Aerial-Tek we provide a professional installation for your Starlink system whether it be wall mounted, chimney mounted or other type of installation. Starlink needs an open view of the Sky usually orientating in a southerly direction, main issues with the installations are trees or close proximity to other buildings there is always a work around.

Types of Installation


Most Starlink jobs we do are wall mounted for stability and to ensure the installation of your equipment is accessible and to ensure a long lasting install. We only use galvanised wall brackets and alloy mast to ensure no rust or staining on the wall.

starlink wall mountedpng


Sometimes due to various reasons such as line of sight, trees, buildings or planning issues such as Listed buildings we have no option to mount up on the chimney. Our chimney installations comprise of a galvanised chimney cradle and lashing bracket, no drilling is done on the chimney to prevent damage issues.
starlink chimney mountedjpeg
 Sometimes you may require a flat roof installation so the dish is hidden such as a listed building, we can install for you and you don't always require an expensive mount we can install onto a concrete slab which we can carry up onto the roof as a secure mounting point.
starlink roof mountedjpeg

Here at Aerial-Tek we can offer more than just installing your new Starlink equipment we also help you get your WI-FI around your property. We are professional installers of Network cabling such as CAT6 including installation of RJ45 sockets. We can advise you and install mesh networks such as the range of TP Link mesh nodes either over wi-fi or backhauled over cat6.

For all your Starlink enquires feel free to get in touch Andy
Tel 07534524684