Starlink Bury

Starlink Installation Bury, £200.00 fixed fee, The Starlink Guys
Here we have a new Starlink installation carried out by Andy and Ethan for a remote renovated farm with all the gadgets and a few different adjoining buildings that all would need some sort of connection.
Current set up is BT copper at 5mbs of which he had 2 of them one for the house and one for the Annexe building so he decided to go for Starlink and get one system and subscription for the whole property that would work.
We installed the Starlink on the first Annexe building which had a boiler room and also had 2 armoured cables fed into there one which runs to the main house the other cable fed into the other building about 50 meters away that would be a gym.
The Starlink was set up using a stumpy pole and alloy mast with cable routed into the serbpver room with an ethernet adapter installed initial speed s coming from Starlink were up at 240mbs.
Second part of the job was to install a network switch in the boiler room and connect a TP Link Deco mesh which was fed into the switch and armoured cables terminated and connected to switch, In the house we connected into another switch and into a couple of decos into the prewired sockets, along with terminating the other armoured cat6 and installing another deco unit. Everywhere around property was getting about 200mbs so great results.
Third part of job was to install an outdoor access point this time using Eap 225 outdoor which now covered the whole extensive garden and garages with full band Wi-Fi customer over the moon.
For more info or to book an install in Bury feel free to get in touch.

Here at Aerial-Tek we provide a professional installation for your Starlink system whether it be wall mounted, chimney mounted or other type of installation. Starlink needs an open view of the Sky usually orientating in a southerly direction, main issues with the installations are trees or close proximity to other buildings there is always a work around.

Types of Installation


Most Starlink jobs we do are wall mounted for stability and to ensure the installation of your equipment is accessible and to ensure a long lasting install. We only use galvanised wall brackets and alloy mast to ensure no rust or staining on the wall.

starlink wall mountedpng


Sometimes due to various reasons such as line of sight, trees, buildings or planning issues such as Listed buildings we have no option to mount up on the chimney. Our chimney installations comprise of a galvanised chimney cradle and lashing bracket, no drilling is done on the chimney to prevent damage issues.
starlink chimney mountedjpeg
 Sometimes you may require a flat roof installation so the dish is hidden such as a listed building, we can install for you and you don't always require an expensive mount we can install onto a concrete slab which we can carry up onto the roof as a secure mounting point.
starlink roof mountedjpeg

Here at Aerial-Tek we can offer more than just installing your new Starlink equipment we also help you get your WI-FI around your property. We are professional installers of Network cabling such as CAT6 including installation of RJ45 sockets. We can advise you and install mesh networks such as the range of TP Link mesh nodes either over wi-fi or backhauled over cat6.

For all your Starlink enquires feel free to get in touch Andy
Tel 07534524684